At embedded world (27.2.-1.3.2018 in Nuremberg), POLYRACK TECH-GROUP will be presenting customer-specific system applications from various industries and areas of use, including electronics integration and a selection of HMI and MMI applications, in addition to a wide range of case systems in Hall 3, Stand 557.
You can view the NEWSflyer here.
At the embedded world (February 27th to March 1st in Nuremberg), the POLYRACK TECH-GROUP will be presenting their wide range of case and system solutions in Hall 3, Booth 557. Customer-specific system applications from various branches and application fields including integration of electronics and a range of HMI and MMI applications will be displayed.
At the embedded world (February 27th to March 1st in Nuremberg), the POLYRACK TECH-GROUP will be presenting their wide range of case and system solutions in Hall 3, Booth 557. Customer-specific system applications from various branches and application fields including integration of electronics and a range of HMI and MMI applications will be displayed.
POLYRACK at embedded world 2018: Case and system applications for individual requirements
Straubenhardt, 8 December 2017 - From 27 February to 1 March 2018 at embedded world in Nuremberg (Hall 3, Stand 557), POLYRACK TECH-GROUP will be presenting a wide range of case systems as well as customer-specific system applications from various industries and areas of use, including electronics integration and a selection of HMI and MMI applications.
For the embedded sector, especially for industrial environments, POLYRACK presents the PanelPC 2 series. These panel PC solutions of protection class IP54 are available in sizes from 10.1'' to 21.5'' as well as in different material variants from milled aluminum to sheet metal bending solutions. Resistive single-touch or multi-touch capable capacitive touchscreens (PCAP) in different glass thicknesses are available as user interfaces. Custom printing and anti-fingerprint coatings are available upon request. To take advantage of different materials, customers can also choose from other technologies for material selection to realize individual requirements, such as plastic and cast iron - also in material combinations.
Small Form Factor with EmbedTEC: The aluminum desktopdesktop case is the elegant packaging for small form factors such as embedded NUC (eNUC), pico-ITX (pITX, 2.5"), SMARC, QSeven and SBCs such as the Raspberry Pi. It has a replaceable I/O shield and a solid aluminum lid for heat dissipation. For higher performance, this can be replaced by a heat sink, while perforated side panels and fans further increase the cooling capacity if required. POLYRACK also offers a wide range of customizations and mounting options for automation and IoT applications.
Other enclosure series such as SmarTEC forhigh-quality systems such as passively cooled mini-PCs, EmbedTEC for embedded computing and HMI applications, and backplanes for the high-speed sector with the VPX and CompactPCI Serial standards complete the portfolio of the enclosure specialist POLYRACK. All solutions are characterized by the appropriate interaction of mechanics, plastics, electronics and the surface finish - tailored to the target market.
POLYRACK at the embedded world 2018: Case and System applications for individual requirements
Straubenhardt (Germany), January 8, 2018 - The POLYRACK TECH-GROUP will be presenting their wide range of case and system solutions from February 27th to March 1st 2018 at the embedded world in Nuremberg (Hall 3, Booth 557). Customer-specific system applications from various branches and application fields including integration of electronics and a range of HMI and MMI applications will be displayed.
For the embedded market, particularly for industrial environments, POLYRACK presents its PanelPC 2-series. These Panel-PC-solutions satisfy the protection class IP54 and are available in sizes from 10.1'' to 21.5'' as well as in different materials such as milled aluminum or sheet metal bending solutions. Resistive single-touch or multi-touch capable touchscreens (PCAP) in different glass thicknesses are options for the user interface. Customer specific printing and anti-fingerprint coating are available on request. In order to use the advantages of different materials, other technologies are available for customers to realize individual requirements in materials, such as plastics and castings - also in a material combination mix.
Small Form Factor with EmbedTEC: The aluminum table top case is the elegant design for small form factors such as embedded NUC (eNUC), pico-ITX (pITX, 2.5"), SMARC, QSeven and SBCs as well as the Raspberry Pi. It comes with a changeable front I/OShield as well as a massive aluminum cover for the heat dissipation. The cover might as well be replaced by a heat sink for improved performance. Alternatively, perforated side panels or small fans can add to the cooling performance on top. POLYRACK also offers various adaptations and mounting options for applications in the fields of automation and IoT.
Supporting enclosure series like SmarTEC for high quality systems such as passive cooled Mini-PCs, EmbedTEC for Embedded Computing and HMI-applications as well as Backplanes for the high-speed domain based on VPX and CompactPCI serial standards are complementary to the product portfolio of the electronic packaging specialist POLYRACK. All solutions are characterized by matching interaction of mechanics, plastics, electronics and surface finish - fine-tuned to the target market.
POLYRACK at the embedded world 2018: Case and System applications for individual requirements
Straubenhardt (Germany), January 8, 2018 - The POLYRACK TECH-GROUP will be presenting their wide range of case and system solutions from February 27th to March 1st 2018 at the embedded world in Nuremberg (Hall 3, Booth 557). Customer-specific system applications from various branches and application fields including integration of electronics and a range of HMI and MMI applications will be displayed.
For the embedded market, particularly for industrial environments, POLYRACK presents its PanelPC 2-series. These Panel-PC-solutions satisfy the protection class IP54 and are available in sizes from 10.1'' to 21.5'' as well as in different materials such as milled aluminum or sheet metal bending solutions. Resistive single-touch or multi-touch capable touchscreens (PCAP) in different glass thicknesses are options for the user interface. Customer specific printing and anti-fingerprint coating are available on request. In order to use the advantages of different materials, other technologies are available for customers to realize individual requirements in materials, such as plastics and castings - also in a material combination mix.
Small Form Factor with EmbedTEC: The aluminum table top case is the elegant design for small form factors such as embedded NUC (eNUC), pico-ITX (pITX, 2.5"), SMARC, QSeven and SBCs as well as the Raspberry Pi. It comes with a changeable front I/OShield as well as a massive aluminum cover for the heat dissipation. The cover might as well be replaced by a heat sink for improved performance. Alternatively, perforated side panels or small fans can add to the cooling performance on top. POLYRACK also offers various adaptations and mounting options for applications in the fields of automation and IoT.
Supporting enclosure series like SmarTEC for high quality systems such as passive cooled Mini-PCs, EmbedTEC for Embedded Computing and HMI-applications as well as Backplanes for the high-speed domain based on VPX and CompactPCI serial standards are complementary to the product portfolio of the electronic packaging specialist POLYRACK. All solutions are characterized by matching interaction of mechanics, plastics, electronics and surface finish - fine-tuned to the target market.
The triple is perfect - KTV Straubenhardt wins the third championship title in a row
At the league final last Saturday in Ludwigsburg's MHP Arena, the Bundesliga team of KTV Straubenhardt fully achieved the set season goal of bringing the now sixth championship and thus the third title in a row to Straubenhardt with a terrific team performance. 34 : 19 was the meaningful score after the end of the competition.
"An amazing team!", the sporting director of KTV Straubenhardt, Dirk Walterspacher, was pleased about this achievement. Andreas Rapp, president of the KTV Straubenhardt support association and responsible for the national league management, was equally enthusiastic: "We are proud of our team, which has achieved a historic victory and brought the triple to Straubenhardt. The team will stay together like this in the coming season. We can once again look forward to high-class gymnastics in Straubenhardt in 2018." The president of the KTV Straubenhardt, Jörg Gänger, who is also responsible for the management of the national league, unanimously agreed with this praise and the promising outlook for the coming season.
The championship team, as well as the responsible persons of the KTV Straubenhardt, would like to thank all sponsors, friends, supporters and the many loyal fans, who have supported the team in large numbers during the entire season and at the league final in Ludwigsburg.
The KTV Straubenhardt Bundesliga squad in the 2017 season included: David Belyavskiy, Andreas Bretschneider, Vahagn Davtyan, Marian Dragulescu, Nils Dunkel, Anton Fokin, Brian Gladow, Vinzenz Haug, Lucas Herrmann, Marcel Nguyen, Tobias Radoi, Ivan Rittschik, Aaron Wagner, Daniel Wörz and Steve Woitalla.
The team was medically attended by team doctor Tobias Renk and physiotherapists Frederic Trautz and Isabell Kugel. Heiko Hagenbucher was the referee.
KTV STRAUBENHARDT gains the third championship title in a row The first league team of KTV STRAUBENHARDT wins their stated goal at the finals last Saturday in the MHP-Arena in Ludwigsburg: The sixth championship and the third title in a row! 34 : 19 the score was after completion of the competition. The championship winning team consisting of the following squad and all the responsible of the KTV Straubenhardt thank all sponsors, friends and all their fans for the support throughout the whole season and the league finals: David Belyavskiy, Andreas Bretschneider, Vahagn Davtyan, Marian Dragulescu, Nils Dunkel, Anton Fokin, Brian Gladow, Vinzenz Haug, Lucas Herrmann, Marcel Nguyen, Tobias Radoi, Ivan Rittschik, Aaron Wagner, Daniel Wörz and Steve Woitalla.
KTV Straubenhardt gagne le troisième titre de championnat consécutif Samedi passé, l'équipe de la première division du KTV Straubenhardt atteint son objectif fixé dans la MHP-Arena à Ludwigsburg : Le sixième championnat et le troisième titre consécutif avec 34 : 19 après la compétition.
L'équipe et les responsables du KTV Straubenhardt remercient les promoteurs, amies et tous les fans fidèles pour leur soutien pendant toute la saison et la finale de ligue. Le cadre de l'équipe de la première division du KTV Straubenhardt dans la saison 2017 consistait du :
David Belyavskiy, Andreas Bretschneider, Vahagn Davtyan, Marian Dragulescu, Nils Dunkel, Anton Fokin, Brian Gladow, Vinzenz Haug, Lucas Herrmann, Marcel Nguyen, Tobias Radoi, Ivan Rittschik, Aaron Wagner, Daniel Wörz et Steve Woitalla.
POLYRACK presents Case and system solutions for demanding applications
Straubenhardt, October 5, 2017 - POLYRACK TECH-GROUP offers high-quality system solutions with the economic benefits of series production and will be presenting HMI/MMI applications at SPS IPC Drives from November 28-30, 2017 (Hall 5, Stand 171).
For the embedded sector, especially for industrial environments, POLYRACK presents the PanelPC 2 series. These panel PC solutions of protection class IP54 are available in sizes from 10.1'' to 21.5'' as well as in different material variants from milled aluminum to sheet metal bending solutions. Resistive single-touch or multi-touch capable capacitive touchscreens (PCAP) in different glass thicknesses are available as user interfaces. Custom printing and anti-fingerprint coatings are available upon request.
Small Form Factor with EmbedTEC: The aluminum desktopdesktop case is the elegant packaging for small form factors such as embedded NUC (eNUC), pico-ITX (pITX, 2.5"), SMARC, QSeven and SBCs such as the Raspberry Pi. It has a replaceable I/O shield and a solid aluminum lid for heat dissipation. For higher performance, this can be replaced by a heat sink, while perforated side panels and fans further increase the cooling capacity if required. POLYRACK also offers a wide range of customizations and mounting options for automation and IoT applications.
Other enclosure series such as SmarTEC for high-quality systems such as passively cooled mini PCs, EmbedTEC for embedded computing and HMI applications, and backplanes for the high-speed sector with the VPX and CompactPCI Serial standards complete the portfolio of the enclosure specialist POLYRACK. All solutions are characterized by the perfect interplay of mechanics, plastics technology and electronics - precisely tailored to the target market.
Sorry, there is no translation for this news-article.
Désolé, il n'y a pas de traduction pour cet article
The POLYRACK TECH-GROUP will be presenting itself at SPS 2017, Europe's leading trade fair for electrical automation, from November 28 to 30 in Nuremberg as a cross-technology partner for standard and customer-specific Case and system solutions for a wide range of markets. We look forward to seeing you in hall 5 at stand 171!
The POLYRACK TECH GROUP will be presenting itself as a cross-technological partner for standard and customized enclosures and system solutions for a wide variety of markets at the SPS 2017, Europe's leading exhibition for electric automation (November 28-30 in Nuremberg). The wide range of expertise of the POLYRACK TECH-GROUP in mechanics, plastics technology, surface treatment, electronics and assembly is represented through different solutions and demonstrated in a mix of materials.
Visit us at our Booth 171 in Hall 5!
POLYRACK TECH-GROUP sera présent au salon SPS 2017, l'exposition principale d'automatisation électrique en Europe, du 28 à 30 novembre 2017 à Nuremberg, comme partenaire de technologie intersectorielle pour solutions de boîtiers et de systèmes standard et spécifiquement adaptées aux clients.
Nous nous réjouissons de votre visite dans la halle 5 stand numéro 171 !
12 young people started their careers with a welcome day on 01.09.2017. In addition to two process mechanics, two metal technology specialists, five tool mechanics, one technical product designer and two industrial clerks, we are also delighted to welcome two dual university students for the Mechanical Engineering and International Business courses at the beginning of October this year. There are currently 31 trainees at POLYRACK TECH-GROUP . The five training managers will do their best to ensure that the young people quickly find their feet in their respective areas of work and network well with their fellow trainees and colleagues. We attach great importance to training our own specialists. In a family-oriented company, our trainees learn everything they need for their future careers.
12 young people started their careers with a welcome day on 01.09.2017. In addition to two process mechanics, two metal technology specialists, five tool mechanics, one technical product designer and two industrial clerks, we are also delighted to welcome two dual university students for the Mechanical Engineering and International Business courses at the beginning of October this year. There are currently 31 trainees at POLYRACK TECH-GROUP . The five training managers will do their best to ensure that the young people quickly find their feet in their respective areas of work and network well with their fellow trainees and colleagues. We attach great importance to training our own specialists. In a family-oriented company, our trainees learn everything they need for their future careers.
12 young people started their careers with a welcome day on 01.09.2017. In addition to two process mechanics, two metal technology specialists, five tool mechanics, one technical product designer and two industrial clerks, we are also delighted to welcome two dual university students for the Mechanical Engineering and International Business courses at the beginning of October this year. There are currently 31 trainees at POLYRACK TECH-GROUP . The five training managers will do their best to ensure that the young people quickly find their feet in their respective areas of work and network well with their fellow trainees and colleagues. We attach great importance to training our own specialists. In a family-oriented company, our trainees learn everything they need for their future careers.
